Rated 5.0 on Google by 53 customers. Fix N Leave is a family-owned garage door company run by Izzy, serving Roswell and north Fulton County. Call (678) 321-9598, 24/7. The service call is free, you get a written price before any work starts, and our work carries a 5-year labor and 90-day parts warranty. We are fully insured, and we will give you an honest arrival estimate on the phone.
North Fulton, on the north bank of the Chattahoochee. From the older streets around Canton Street and the mill on Vickery Creek, out along Holcomb Bridge Road either side of GA-400, and up Alpharetta Highway toward the Alpharetta line — broken springs, dead openers, frayed cables and doors off their tracks, 24 hours a day.
Free service call. Single spring from $170. 5-year labor warranty · 90-day parts warranty.
Roswell sits in north Fulton County on the north bank of the Chattahoochee River, with GA-400 running through the middle of it. The town grew up around a cotton mill built on Vickery Creek in 1839, and the old centre — Historic Roswell, with Canton Street running through it — still carries that history in its older houses and the carriage houses behind some of them.
Most of Roswell is not that old. Away from the historic district, along Holcomb Bridge Road to the east and west of GA-400 and up Alpharetta Highway (GA-9) to the north, it is subdivision housing with attached two-car garages, sectional steel doors and the springs and openers that came with them. Many of those neighbourhoods are governed by an HOA.
So a Roswell call can be almost anything: a heavy older door on a house near Canton Street, a broken torsion spring in a subdivision off Holcomb Bridge Road, or a roll-up door at a shop on Alpharetta Highway. We ask the questions on the phone so the technician turns up with the right parts.
Across the county line to the west, we cover East Cobb and the rest of Marietta on the same terms, and further out along I-75, Kennesaw.
The calls here split along the same line as the housing: older doors near the historic centre, and doors in the subdivisions reaching the end of their parts’ rated life.
A wood door, or one that has been painted, patched and re-hung over the years, often weighs more than the springs last fitted to it were sized for. The door feels heavy by hand, the opener labours, and the springs wear out early. The fix is springs matched to the door’s real weight, not a straight swap for whatever came off.
Standard torsion springs are rated around 10,000 cycles — roughly seven years at four or five openings a day. In a busy household on a two-car door that comes round sooner than people expect, and the first sign is often a door that will not open at all. Our garage door won’t open guide covers what to check and what to leave alone.
Chain and belt openers usually fail at the plastic drive gear, long before the motor goes. If the motor runs and the door sits still, that is often a gear kit, not a new opener, and we will tell you which it is. If the remote has stopped working but the wall button still runs it, see our garage remote troubleshooting guide. If the opener is beeping, see the garage door opener beeping guide.
Georgia humidity is hard on bare steel, and a garage that stays damp — low-lying, shaded, or never aired out — shows it first on the springs, the cable ends and the bottom brackets. Surface rust adds friction; rust at a cable end is a reason to replace the cable before it lets go.
Where a garage floor has settled or slopes toward the drive, one end of the door touches down before the other. The bottom seal wears unevenly, light and water get in at the high side, and an opener set to compensate can stop reversing properly. That one is worth a proper adjustment, not just a new seal.
The safety sensors sit a few inches off the floor either side of the opening, right where bikes, bins and strollers catch them. A door that reverses for no reason is usually a realignment, and our sensor guide shows how to check them yourself first.
Choose the service that fits your door, or call us for help identifying the problem.
Inspection and replacement of torsion and extension springs, with the door balanced and checked.
Learn more →Diagnosis of motor, drive, control and sensor faults, with repair or replacement options.
Learn more →Inspection of lifting cables, drums and rollers to address uneven or noisy travel.
Learn more →Find the cause of a crooked or jammed door and restore safe alignment where repair is possible.
Learn more →Compare door styles, insulation and hardware with a free in-home estimate.
Learn more →Understand whether the problem needs a hardware repair, a panel or a complete door.
Learn more →Call at any hour for a door stuck open or a trapped vehicle. Confirm dispatch availability by phone.
Learn more →The same order on every Roswell call, whether it is a house near Canton Street or a unit off Holcomb Bridge Road.
The noise, roughly how wide the door is, whether the spring sits above the opening or along the tracks, and whether the door is wood or steel. A photo sent by text helps.
One of our own technicians, not a call-centre subcontractor, with springs, cables, rollers and opener parts already on board. The visit is free.
You approve a written price before anything is touched. No call-out charge either way, and the door is balance- and safety-tested before we leave.
A typical broken-spring call in Roswell starts with a phone call to (678) 321-9598, any hour. The service call is free: a technician comes out, checks the springs, cables, rollers and opener, and tells you what failed and why. You get a written price before any work starts, and nothing is done until you agree to it. If you go ahead, the technician replaces the spring, balances and tests the door, and the work carries our 5-year labor and 90-day parts warranty.
Common parts travel on the truck, so most repairs are finished on the first visit.
Whether your house is a few streets from Canton Street or in a subdivision off Holcomb Bridge Road, check these before anyone starts work on your door.
If the door is at a business in Roswell rather than a home, our commercial garage door repair page covers how we handle it.
Hold Fix N Leave to every point on that list. We are a family-owned company, fully insured and open 24/7. Call (678) 321-9598 for a free service call and a written price before any work.
Send your name, number and what the door is doing. We call back fast — usually within minutes during the day.
What people in Roswell and the rest of north Fulton ask before they book.
Every town we serve, Alpharetta and Sandy Springs included, is listed on the service area page.
Cobb County · 30060, 30062, 30064, 30066 and 30068. East Cobb borders Roswell to the west.
Garage door repair in Marietta →Cobb County · 30144 and 30152. Out along I-75, past Marietta.
Garage door repair in Kennesaw →Shops, warehouses and business units: the same written-price-first rule.
Commercial garage door repair →One call and a technician is on the way with springs, cables, rollers and opener parts already on the truck. Free service call, 24 hours a day, and a written price before anything is touched.
Name, number, and what's wrong — we'll call you right back, usually within minutes.